FAQ
Frequently Asked Questions
General use
How do I use the Analemma water wand?
Unscrew the protective cover and carefully remove the Analemma wand from the package.
To treat plain water with the Analemma wand fully immerse the crystal part and stir for about 1 minute per 1 L of water. Using this general formula, you can calculate the duration for any amount of water. For example, a regular glass of water should be stirred for about 10-15 seconds.
After each use, wipe the Analemma dry with a clean cloth and store it back in its case.
Can I also treat distilled, reverse osmosis, filtered, alkaline or hydrogen treated water with Analemma?
Yes, Analemma can be used with any type of room temperature beverage. This includes mineral water, spring water, filtered water, etc.
Can I also use the Analemma water wand for juices, wine, kefir or yogurt?
Yes, you can use the Analemma water wand on any room temperature drink that is drinkable. As long as it contains water, Analemma will have an effect on it. In fact, we find that it also positively affects the taste and also expect a positive effect on the shelf life afterwards.
To keep the rod in top condition, rinse it with warm water after this type of use to remove any remaining organic particles.
Can I also use it for coffee or tea?
Unlike room temperature beverages, we do not recommend immersing the Analemma wand in hot liquids. This may break the delicate crystal tube. Nevertheless, you can enjoy your favorite tea or coffee by using pretreated coherent water. This heating process after it does not adversely affect the coherent state of the water just treated, so enjoy your hot beverage without worry.
Can I open the water bar and drink the "mother water" or smear it on the skin?
Do not attempt to open the tube as this will render the rod unusable. Analemma is designed exclusively to create coherent water. Water treated with the Analemma water wand can be used as desired
Can I also use the water rod to make my bath coherent?
Yes this is certainly possible! But our general formula is not suitable for water quantities larger than 30 Liters. The reason for this is the large difference in surface area between the Analemma wand and the mass of water to be treated. In this case, we recommend extending the formula to 1.5 minutes per 1 L of water. This will ensure that most of the water molecules come into contact with the wand.
Can I leave the water wand in the water?
The Analemma water wand is a portable device designed to treat small volumes of water. However, we understand that you may want to use it for larger volumes. If you decide to do so, it is essential to use the device properly to avoid damage.
Instead of treating large volumes of water manually, you can soak the water wand in the water for a longer period of time. Since there is no stirring involved, it takes longer for all the water molecules to reach the wand. It is advisable to keep the rod submerged for as long as possible. However, be careful not to submerge the metal cap, because constant moisture can damage the glue that holds the metal cap to the crystal tube, which can permanently damage your wand.
Can I use coherent water for boiling?
Yes, we recommend treating room temperature water with the Analemma wand and then using this water for boiling.
Does heating/freezing have an adverse effect on the treated water?
Heating or freezing has no lasting negative effect on the coherent state of the treated water. At temperatures above 65°C, the coherent structure becomes temporarily disturbed due to natural fluctuations in the behavior of water molecules. However, our tests have shown that the coherent structure recovers as soon as the water returns to more normal temperatures (4°C-65°C).
Can I water my plants coherently?
Yes, in fact, this is more than advisable. In fact, our research has shown that Analemma water can help plants in several ways. For example, it promotes plant vitality, improves soil quality and increases the energy capacity of fruits. Our most recent study with basil plants even shows that Analemma water can protect essential processes such as respiration and photosynthesis, even during droughts.
Functional
Is this the same as a water filter?
No, Analemma products are not water filters. It affects the physical state of water, but does not change its chemical composition. However, to further increase the quality of your drinking water, we recommend using Analemma on pre-filtered water whenever possible.
How long does the treated water remain coherent?
To date, Analemma water appears to maintain its coherent state indefinitely. Our most recent tests were conducted with water that had been treated 5 years earlier, and that still showed a coherent structure
If I mix coherent water with plain water, will the whole thing become/stay "coherent" as a whole?
Water treated with Analemma does not cause ordinary water to become coherent in the same way that “mother water” does. After you combine plain and coherent water, you need to stir the new body of water again to make sure it is sufficiently treated. To do this, it is best to follow our standard stirring formula. For example, if you add 1 L of plain water to your coherent water, you should stir for at least another minute.
How is the coherence of both the Analemma "Mother Water" and the treated water tested?
Our main test is an indirect biological analysis based on biophoton emission from germinating plant seeds. Our early research showed that coherent water produces a specific biophoton emission curve that differs from a curve produced by normal water. Since Analemma water was originally created as a byproduct of biophoton research, it remains our most reliable indirect analysis for rapidly measuring changes in water.
Biophoton emission is tested using highly sensitive cameras. For our standardized tests, we analyze the biophoton emission curves produced by plant seeds during germination. Seed germination requires only water and light, so by keeping the light exactly the same and changing only the water, we can assess the changes in the water by measuring the difference in metabolic activity of the seeds. It is important to note that water coherence is part of an emerging scientific field and there are currently no standardized tests for directly measuring water coherence using conventional technology. We used several tests to measure the size of coherent domains in Analemma water, including Raman, UV/VIS and NIR spectroscopy (also known as aquaphotomics) and temperature perturbations. However, these tests did not provide sufficient reproducibility to be used for quality assurance.
What is the major difference between Analemma Water and other "vitalization" methods?
What is "Mother Water?"
The “Mother Water” is the water with a complete coherent structure with which all Analemma products are filled. This Mother Water is created through a five-step process that extends over a period of one year.
In short, the water begins as normal, clean water, purified of chemical and biological contaminants. It then undergoes a physical procedure similar to the natural movements and cycles of water in nature, through the seasons. This process puts the mother water into a highly ordered physical state. This ordered structure can then be transferred to surrounding water molecules through direct physical contact (such as stirring normal water with the Analemma rod).
How can the "mother water" if it is shut off still affect the surrounding water?
When stirring normal water with the Analemma wand, the coherent structure of the “mother water” in the vial is successfully copied to the surrounding water molecules. For this to work, the vial had to be designed in a specific way. During development, we experimented with different materials. In the end, quartz proved to be the best choice because of its specific physical composition. Quartz provides a smooth energy transfer between the inside and outside of the vial. This is the main reason why the wand is so fragile. In fact, the vial had to be ultra-thin so as not to disturb the transfer of the coherent structure.
Does the rudder direction still matter?
Rudder direction does not affect the operation of the Analemma wand. We tested both rudder speed and direction of rotation and neither parameter was found to affect the coherent state of the water.
How long does the Analemma Water wand last?
Our tests show that the “mother water” in the Analemma rods does not lose its coherent state over time. This water is extremely stable and retains its coherence even after exposure to strong electromagnetic radiation (e.g., X-rays).
Of course, it is no longer effective if you have dropped it broken.
Will ElectroMagnetic Radiation (EMFs) have an effect on the mother water?
No. We tested the coherence of Analemma-treated water when exposed to various radiation sources, such as radiofrequency radiation (emitted by cell phones, computers and similar electrical devices), microwave radiation, visible light, UV radiation and short-term X-rays. Regardless of the type of radiation, exposure to various electromagnetic waves did not affect the coherence of Analemma water.
Is there a difference between the Stainless steel and Luxury Walnut wand?
Storage and safety
How should I store the wand?
Store the wand at room temperature.
What can I store the treated water in?
You can store coherent water in any type of container you would normally use. We tested all the most commonly used materials (glass, plastic, steel, copper, clay) and found no difference in coherent structure.
Also, can I take my wand safely through customs without the X-rays affecting the wand?
Can I also carry the wand in my carry-on luggage?
Please prefer to carry the Analemma wand in your checked checked hold baggage, rather than your carry-on baggage.
The Analemma wand contains liquid. Because this is not a standard household item, airport staff may mistakenly categorize it as a prohibited device or liquid.
Many travelers do carry their Analemma wand in their carry-on luggage, but to avoid problems, we always recommend putting it in your checked luggage if you have that option.
Extra tip: Keep the original packaging of the Analemma wand. This can help explain what it is to airport personnel.
What is the best way to handle my Analemma wand?
To ensure that your Analemma water wand remains in excellent condition for many years, it is important to use and store it correctly. After use on plain water, dry the Analemma water wand with a clean cloth before putting it back in its protective case. If you use the Analemma water wand for juices or similar drinks, we recommend rinsing it with cold or lukewarm water to remove any organic particles. If necessary, you can wash it with a mild natural soap, but usually a rinse after use is sufficient.
What happens if I drop my wand?
To ensure the Analemma water wand’s operation, the quartz crystal in the ampule must be made ultra-thin. This allows us to offer you a tool for creating unlimited amounts of coherent water, but it also makes the water wand very fragile. If you drop the water wand, it will almost certainly break. Therefore, be careful when using it and store the wand in a safe place, out of reach of pets and small children.
I see small particles in my water wand. What is this?
In making the Analemma “mother water,” all water is first carefully filtered. Because water is a bipolar pool of molecules, clusters of minerals are formed during the process of coherence.
If the clusters become large enough, they can form small but visible particles. To remove the particles, we would have to use a very specific filter that would disrupt the coherent state of the water. The particles do not disturb or affect the efficiency of the water in any way.
However, if you see large particles in your Analemma wand, please send a photo of your product to info@analemma-water.nl and our customer service team will assist you further.
Do you have other questions that are not on this FAQ page?
Please contact us at info@analemma-water.nl
and our customer service team will be happy to assist you!
